StarTec: Wall Formwork
The high capacity universal formwork system for manual application and crane use
StarTec is a versatile formwork system suited to all sized contractors for use in domestic, commercial, civil and industrial construction projects, large and small. The system is light enough for manual application, but also solid and sturdy enough for crane ganging.
The panels are available in heights of 3300, 2700, 1350 and 900 mm; including a large-size panel of 2700 by 2400 mm. It is always possible to combine the panels in a way to obtain continuous vertical joints in the concrete and keep the projecting formwork height at a minimum.
As the profiles and panel sizes are identical, StarTec can be combined with the aluminium formwork system AluStar, in any possible way.
Features & Benefits
Quality
Manufactured under stringent European quality control & compliant with Australian Standards.
Superior Finish
Alkus form-facing delivering a superior finish on all formed concrete surfaces. No shrinkage, warping or swelling and UV resistant.
Strength
Resistant of high concrete pressure with a load capacity of 70kN/m2. Concrete pours at any speed up to 3.30 metres.
Productivity
Fast panel connection using the lightweight assembly lock, attachable with one hand at any position. Safe connection and perfect alignment with a few hammer blows.
Compatible
StarTec can be used as wall formwork or for columns. It is fully compatible with AluStar.
Adaptable
Ideal panel sizes adjustable to every layout, small and large projects. Universal accessories simply connected using multifunction profiles.
Efficiency
Your advantage: few accessories, easy stock-keeping, no time consuming searching for unnecessary components.
Durability
Autophoretic Chemical Coating and Cathodic submersion coating, along with closed profiles extends the panel lifespan and reduces cleaning.
STRONG
VERSATILE
EFFICIENT
FAST
Multifunction Profiles
Meva multi-function profiles with integral Z-Bar threaded nuts permit fast attachment of all accesories:
- Wall braces and alignment rails are mounted with flange screws.
- Scaffolding brackets are quickly attached with their integrated self-locking pins.
- Problem areas can be compensated by attaching Z-Bar tie rods to the multi-function profile – independent of tie holes.
System Components
Panel
Heights of 3300, 2700, 1350 & 900mm.
Widths from 2400 to 200mm.
Assembly Lock
Galvanised Steel
2 kg
Articulated Flange Nut
Galvanised Steel
1.80 kg
Flange Screw
Galvanised Steel
180 or 270 mm, 1.10 - 1.20 kg
