AluStar is a light-weight, modular aluminium formwork system for use in structural and civil engineering projects.
AluStar is a light-weight, modular aluminium formwork system for use in structural and civil engineering projects. The largest panel, 2700mm by 900mm, weighs only 65kg. Contractors of any size appreciate AluStar as a formwork system for all jobs where no crane is available. It is mostly applied in domestic construction, smaller commercial and civil jobs and wherever the formwork has to be assembled by hand.
The special 2-chamber profile is extremely sturdy, torsionally braced and rugged. It enables easy handling with high efficiency. It is built tough enough for a long service life and a higher number of reuses. The Assembly Lock permits the fast and safe connection of the panels. It can be attached on the frame at any position and connects and aligns the panels in one operation. Since the lock weighs only 2 kg, it can be easily attached with one hand, even if working on a ladder.
The multi-function profiles with integral Z-Bar-threaded nuts permit fast attachment of all accessories:
- Wall braces and alignment rails are mounted with flange screws.
- Scaffolding brackets are quickly attached with their integrated self-locking pins.
- Problem areas can be compensated by using Z-Bar tie rods of any length that are also attached to the multi-function profile – independent of tie holes.
Available in heights of 2700 and 1350 mm. Widths from 900 to 200 mm.
Articulated Flange Nut
180 or 270 mm, 1.10 - 1.20 kg